Dell PowerEdge HR675, Руководство владельца оборудования

Страница: 49 / 194

Using the System Setup Program
49
Serial Communication Screen
Table 2-7 lists the options and descriptions for the information fields that
appear on the
Serial Communication screen.
I/OAT DMA Engine
( Disabled default)
Enables the I/O Acceleration Technology (I/OAT) option.
This feature should be enabled only if the hardware and
software support I/OAT. The I/OAT Data Memory
Tranfer (DMA) Engine transfers data between memory
modules, allowing data to bypass the CPU. I/OAT will be
supported on the NICs.
System Interrupt
Assignment (Standard) Controls the interrupt assignment of PCI devices in the
system. When set to distributed, the interrupt routing
will be swizzled to minimize IRQ sharing.
Table 2-7. Serial Communication Screen Options
Option Description
Serial Communication
(
On without Console
Redirection default)
Options are On without Console Redirection , On with
Console Redirection via COM1 , On with Console
Redirection via COM 2, and Off .
External Serial Connector
(
COM1 default)
Specifies whether COM1 , COM2 , or Remote Access
Device has access to the external serial connector for
serial communications.
Failsafe Baud Rate
(
115200 default)
Displays the failsafe baud rate used for console
redirection when the baud rate cannot be negotiated
automatically with the remote terminal. This rate
should not be adjusted.
Remote Terminal Type
(
VT 100/VT 220 default)
Select either VT 100/VT 220 or ANSI .
Redirection After Boot
(
Enabled default)
Enables or disables BIOS console redirection after your
system boots to the operating system.
Table 2-6. Integrated Devices Screen Options (continued)
Option Description
book.book Page 49 Sunday, June 21, 2009 10:04 AM