Figure 15. Installing the memory module
1.
memory module
2. alignment key
3. memory module socket ejector (2)
Next steps
1.
Follow the procedure listed in the After working inside your system section.
2.
Press F2 to enter System Setup, and check the
System Memory
setting.
The system should have already changed the value to reflect the installed memory.
3.
If the value is incorrect, one or more of the memory modules may not be installed properly. Ensure
that the memory module is firmly seated in the memory module socket.
4.
Run the system memory test in system diagnostics.
Related Links
Safety instructions
Before working inside your system
Installing the cooling shroud
Removing memory modules
After working inside your system
I/O module mezzanine cards
Your system supports a variety of optional mezzanine cards. If installed, the mezzanine card(s) must be
used in conjunction with a matching I/O module(s).
For more information on I/O modules, see "Guidelines for Installing I/O Modules" in the
M1000e
Enclosure Owner's Manual
at
dell.com/support/home
.
Mezzanine card installation guidelines
The blade supports up to four mezzanine cards:
76
