Installing the optional IDSDM card
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the IDSDM card to replace a faulty IDSDM card or service other
components inside the system.
1.
Follow the safety guidelines listed in safety instructions section.
2.
Keep the Phillips #2 screwdriver ready.
3.
Remove the SD card.
4.
Remove the IDSDM card.
CAUTION: To prevent damage to the IDSDM card, you must hold the card only by its edges.
1.
Align the following:
• The slot on the card edge with the projection tabs on the PCIe mezzanine card support.
• The two screw holes on the IDSDM card with the standoffs on the system board.
• The hole on the SD card slot bracket with the screw hole on the IDSDM card.
2.
Install the two screws to secure the SD card slot bracket and IDSDM card to the system board.
Figure 24. Installing the optional IDSDM card
1.
IDSDM card
2. screw (2)
3. SD card slot bracket
4. PCIe mezzanine card support bracket
80
