Dell PowerEdge 860 Скачать руководство пользователя страница 24

Страница: 24 / 36

Back to Contents Page

Keyboard

Dell™ Vostro™ A840/A860 Service Manual

Removing the Keyboard

Replacing the Keyboard

Removing the Keyboard

Follow the procedures in

Before You Begin

Remove the center control cover (see

Center Control Cover

Remove the two screws at the top of the keyboard.

Carefully lift the keyboard and hold it to access the keyboard connector.

Lift the connector latch that secures the keyboard cable to the system board connector and remove the keyboard cable.

Lift the keyboard away from the computer.

Replacing the Keyboard

Slide the keyboard cable into the connector and press down on the connector latch to secure the cable.

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the

computer.

NOTICE:

The keycaps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Be careful when removing and handling the

keyboard.

NOTICE:

Be extremely careful when removing and handling the keyboard. Failure to do so could result in scratching the display panel.

keyboard screw (2)

keyboard

keyboard tab

keyboard connector

NOTICE:

The keycaps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Be careful when removing and handling the

keyboard.

Содержание PowerEdge 860





































Результаты поиска

Содержание PowerEdge 860

Отзывы:

Похожие инструкции для PowerEdge 860

Бренды по названию

Популярные бренды

Dell PowerEdge 860, Руководство по обслуживанию

Результаты поиска

Содержание PowerEdge 860

Отзывы:

Похожие инструкции для PowerEdge 860

Бренды по названию

Популярные бренды