Dell POWEREDGE 4300, Руководство по обслуживанию

Страница: 88 / 104

4-30 Dell PowerEdge 4300 Systems Service Manual
',00V
)LJXUH',005HPRYDO
To remove a DIMM, follow these steps:
1. Remove the interior support panel.
2. Press outward on the socket’s securing clips until the DIMM is released
from the socket (see Figure 4-25). Then, lift the DIMM away from the
socket.
To replace a DIMM, press outward on the securing clips until they snap open
(see step 1 in Figure 4-26). Align the notches in the DIMM to the crossbars in
the socket, and press down on the outer edges of the DIMM while pulling up
on the securing clips until the clips lock around the ends of the DIMM (see
step 2 in Figure 4-26).
)LJXUH',00,QVWDOODWLRQ
securing clips
notches
1.
2.
securing clips