Dell POWEREDGE 4300 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 104

background image

1-2

Dell PowerEdge 4300 Systems Service Manual

system; the upgrade kit from Dell contains the correct version for this
system.

A secondary (L2) cache of 512 KB of SRAM included within the SEC car-
tridge that contains the microprocessor.

64-MB and 128-MB (unbuffered) main memory, upgradable to 512 MB, or
upgradable to 1 GB using 256-MB registered SDRAM DIMMs.

BIOS in upgradable flash memory on the ISA bus.

Up to six hot-pluggable SCSI hard-disk drives. Two additional 1-inch drives
can be installed in the optional removable media bay.

Up to three redundant, hot-pluggable power supplies and a power-supply
paralleling board (PSPB), which is necessary for systems with two or more
power supplies.

Five redundant system cooling fans.

Six 32-bit PCI connectors and two shared 8-bit or 16-bit ISA connectors.

PCI and AGP local buses and ISA bus.

A VGA-compatible video subsystem with an ATI 3D Rage Pro AGP video
controller. This video subsystem contains 2 MB of SGRAM video memory
(nonupgradable).

A National Semiconductor PC87309 super I/O controller that controls the
bidirectional parallel port, two serial ports, and the diskette drive in the
externally accessible front bay.

An integrated Adaptec AIC-7890 Ultra2/LVD SCSI-3 host adapter that sup-
ports up to six 1.6-inch internal SCSI hard-disk drives via a SCSI backplane
board and special SCSI hard-disk drive carriers.

NOTE: The 1.6-inch drive carriers will accommodate 1-inch drives.

The SCSI backplane automatically configures SCSI ID numbers and SCSI
termination on individual hard-disk drives, greatly simplifying drive installa-
tion. The backplane supports hot-pluggable SCSI hard-disk drive installation
and removal when used in conjunction with a PowerEdge Expandable
RAID Controller.

An integrated Adaptec AIC-7860 Ultra/Narrow SCSI-3 host adapter that
supports the standard CD-ROM drive and two additional externally accessi-
ble SCSI devices in the external hard-disk drive bays.

Drive failure, online, and activity indicators visible on each hard-disk drive
connected to the SCSI backplane.

Server management circuitry that monitors operation of the system fans
as well as critical system voltages and temperatures. The server manage-
ment circuitry works in conjunction with the HP OpenView Network Node
Manager Special Edition (NNM SE) and the Dell OpenManage™ Hardware
Instrumentation Package (HIP).

System board support for the Dell OpenManage Remote Assistant when
the optional Dell Remote Assistant Card version 2 (DRAC 2), which pro-
vides additional local and remote server management, is installed.

«
...
8
9
10
11
12
...
»

Содержание POWEREDGE 4300









































































































Отзывы:

Нет отзывов

Похожие инструкции для POWEREDGE 4300

Бренд: Patton electronics Страницы: 8

F-ZTAT H8/3048 Series

Бренд: Renesas Страницы: 34

iW-RainboW-G30D

Бренд: iWave Страницы: 89

Бренд: Kanguru Страницы: 13

AAA-130SA SERIES

Бренд: Adaptec Страницы: 94

HHM Series HHM2245SA1

Бренд: TDK Страницы: 2

Бренд: 2N Telekomunikace Страницы: 67

Бренд: Kaya Instruments Страницы: 48

Бренд: Corsair Страницы: 10

Бренд: NetBurner Страницы: 30

Бренд: Cypress Semiconductor Страницы: 18

Бренд: ELSA Страницы: 60

Бренд: Helmholz Страницы: 14

Бренд: Agilent Technologies Страницы: 458

Selenio SNP-GW-3GX32

Бренд: Imagine communications Страницы: 153

Instruction Card Video DC Block

Бренд: Extron electronics Страницы: 1

Бренд: COMMUNICATIONS-APPLIED TECHNOLOGY Страницы: 36

7800 SERIES RM7895A

Бренд: Honeywell Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды