Dell PowerEdge 1655MC, Руководство по настройке системы

Страница: 13 / 223

S y s t e m C o n f i g u r a t i o n G u i d e
1-9
5
To set a static IP address for the network switch module, type:
#config
(config)#interface vlan 1
(config-if)#ip address
<
ip address, subnet mask
>
(config-if)#exit
(config) #ip default-gateway <default gateway address>
(config)#exit
#copy running-config startup-config
where
#
indicates the privileged mode,
(config)
represents the global configuration
mode, and
(config-if)
represents the interface configuration mode.
The network switch module can store multiple configuration files. The network switch
module prompts you for a filename for the configuration.
6
Type
quit
or
exit
to logout of the serial switch console.
7
Type
~.
and press <Enter> to return to the management console.
8
To configure the second network switch module (if one is present), perform the
previous configuration steps.
NOTE:
It is recommended that you change the default user name and password. For
further information, see the Dell PowerEdge Integrated Switch User’s Guide
.
After the network switch module is configured, you may use the browser-based GUI, Telnet
consoles by way of the network, or continue to configure the network switch module using
the serial command-line utility. See the online
Dell PowerEdge Integrated Switch User's
Guide for detailed information on configuration .
Integrating the System Into the Network
The Dell™ PowerEdge™ 1655MC is essentially a self-contained network. Table 1-2 and
Table 1-3 show the mapping of the internal and external ports.
Ta b l e 1 - 2 . I n t e r n a l N e t w o r k P o r t M a p p i n g
Module Port Network Switch
1 Port Network Switch
2 Port
Server module 1
LOM 1
1/1
LOM 2 1/1
Server module 2
LOM 1
1/2
0w440eb1.fm Page 9 Monday, October 28, 2002 2:23 PM