Dell PowerConnect B-FCX, Руководство пользователя

Страница: 91 / 152

PowerConnect B-Series FCX Web Management Interface User Guide 81
53-1002268-01
Configuring a RADIUS server
4
FIGURE 62 Configuring a RADIUS server
The RADIUS display contains the following information.
Click Show to display the current RADIUS server configuration, as shown in Figure 63 .
Retransmit This parameter specifies how many times the Dell device will resend an authentification
request when the RADIUS server does not respond. The retransmit value can from 1-5
times. The default is 3 times.
Timeout This parameter specifies how many seconds the Dell device waits for a response from a
RADIUS server before either retrying the authentication request, or determining that the
RADIUS servers are unavailable and moving on to the next authentication method in the
authentication-method list. The timeout can be from 1 – 15 seconds. The default is 3
seconds.
Dead Time This parameter specifies how long the Dell device waits for the primary authentication
server to reply before deciding the server is dead and trying to authenticate using the next
server. The dead-time value can be from 1 – 5 seconds. The default is 3 seconds.
Key This parameter in the RADIUS-server command is used to encrypt RADIUS packets before
they are sent over the network. The value for the key parameter on the Dell device should
match the one configured on the RADIUS server. The key can be from 1 – 32 characters in
length and cannot include any space characters.