Dell PowerConnect 3400 Series Скачать руководство пользователя страница 451

Страница: 451 / 456

802.1x Commands

451

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

ADVANCED FEATURES

dot1x auth-not-

The

dot1x auth-not-req

Interface Configuration mode command enables unauthorized devices

access to the VLAN. To disable access to the VLAN, use the

form of this command.

Syntax

dot1x auth-not-req

no dot1x auth-not-req

Default Configuration

Access is enabled.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

•

An access port cannot be a member in an unauthenticated VLAN.

•

The native VLAN of a trunk port cannot be an unauthenticated VLAN.

•

For a general port, the PVID can be an unauthenticated VLAN (although only tagged packets
would be accepted in the unauthorized state.)

Examples

The following example enables access to the VLAN to unauthorized devices.

EapolReqFramesTx

The number of EAP Request frames (other than Rq/Id frames) that
have been transmitted by this Authenticator.

InvalidEapolFramesRx

The number of EAPOL frames that have been received by this
Authenticator in which the frame type is not recognized.

EapLengthErrorFramesRx

The number of EAPOL frames that have been received by this
Authenticator in which the Packet Body Length field is invalid.

LastEapolFrameVersion

The protocol version number carried in the most recently received
EAPOL frame.

LastEapolFrameSource

The source MAC address carried in the most recently received EAPOL
frame.

Console(config-if)

# dot1x auth-not-req

Содержание PowerConnect 3400 Series









































































































































































































































































































































































































































































Результаты поиска

Содержание PowerConnect 3400 Series

Отзывы:

Бренды по названию

Популярные бренды

Dell PowerConnect 3400 Series, Справочное руководство CLI

Результаты поиска

Содержание PowerConnect 3400 Series

Отзывы:

Бренды по названию

Популярные бренды