manualshive.com logo in svg

Dell PowerConnect 3400 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3400 Series Скачать руководство пользователя страница 401

VLAN Commands

401

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

inte

r

face 

r

ange vlan

The 

interface range vlan 

Global Configuration mode command enables simultaneously 

configuring multiple VLANs.

Syntax

interface range vlan

 {

vlan-range 

|

 

all

}

•

vlan-range

 — Specifies a list of VLAN IDs to be added. Separate non-consecutive VLAN 

IDs with a comma and no spaces; a hyphen designates a range of IDs.

•

all

 — All existing static VLANs.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

•

Commands under the interface range context are executed independently on each interface 
in the range. If the command returns an error on one of the interfaces, an error message is 
displayed and execution of the command continues on the other interfaces.

•

The following commands are not supported with the 

interface range vlan 

command: 

private-

vlan primary

, 

private-vlan community

, 

private-vlan isolated

 and 

ip internal-usage-vlan

.

Example

The following example groups VLANs 221, 228 and 889 to receive the same command.

na

m

e

The 

name 

Interface Configuration mode command adds a name to a VLAN. To remove the 

VLAN name, use the 

no 

form of this command. 

Syntax

name 

string

no name

•

string

 — Unique name to be associated with this VLAN. (Range: 1-32 characters)

Console(config)# 

interface range vlan

 221-228,889

Console(config-if)#

Содержание PowerConnect 3400 Series









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды