manualshive.com logo in svg

Dell PowerConnect 3400 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3400 Series Скачать руководство пользователя страница 411

VLAN Commands

411

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

•

The command adds the port as a member in the VLAN. If the port is already a member in the 
VLAN (not as a native), it should be first removed from the VLAN. 

Example

The following example configures VLAN number 123 as the native VLAN when Ethernet port 
1/e16 is in trunk mode.

switch

p

o

r

t gene

r

al allowed vlan

The 

switchport general allowed vlan 

Interface Configuration mode command adds or removes 

VLANs from a general port.

Syntax

switchport general allowed vlan add 

vlan-list 

[

tagged

 | 

untagged

]

switchport general allowed vlan remove 

vlan-list

•

add

 

vlan-list

 — Specifies the list of VLAN IDs to be added. Separate non-consecutive 

VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.

•

remove

 vlan-list

 — Specifies the list of VLAN IDs to be removed. Separate non-

consecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs.

•

tagged

 — Indicates that the port transmits tagged packets for the VLANs.

•

untagged

 — Indicates that the port transmits untagged packets for the VLANs.

Default Configuration

If the port is added to a VLAN without specifying tagged or untagged, the default setting 
is tagged.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

Console(config)# 

interface ethernet 

1/e16

Console(config-if)# 

switchport trunk native vlan

 123

Содержание PowerConnect 3400 Series









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды