manualshive.com logo in svg

Dell PowerConnect 3400 Series, Справочное руководство CLI

Поделиться
Скачать
Dell PowerConnect 3400 Series Скачать руководство пользователя страница 443

802.1x Commands

443

DELL CONFIDENTIAL – PRELIMINARY 9/13/06 – FOR PROOF ONLY

Default Configuration

Timeout period is 30 seconds.

Command Mode 

Interface Configuration (Ethernet) mode

User Guidelines

•

The default value of this command should be changed only to adjust for unusual 
circumstances, such as unreliable links or specific behavioral problems with certain clients. 
and authentication servers

Examples

The following command sets the number of seconds that the device waits for a response to an 
EAP-request/identity frame, to 3600 seconds.

dot1x 

m

ax-

r

eq

The 

dot1x max-req

 Interface Configuration mode command sets the maximum number of 

times that the device sends an Extensible Authentication Protocol (EAP)-request/identity frame 
(assuming that no response is received) to the client, before restarting the authentication 
process. To return to the default configuration, use the 

no

 form of this command.

Syntax

dot1x max-req

 

count

 

no dot1x max-req

 

•

count — 

Number of times that the device sends an EAP-request/identity frame before 

restarting the authentication process. (Range: 1-10)

Default Configuration

The default number of times is 2.

Command Mode 

Interface Configuration (Ethernet) mode

User Guidelines

•

The default value of this command should be changed only to adjust for unusual 
circumstances, such as unreliable links or specific behavioral problems with certain clients. 
and authentication servers

Console(config)# 

interface ethernet 

1/e16

Console(config-if)# 

dot1x timeout tx-period 

3600

Содержание PowerConnect 3400 Series









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды