Dell POWER EDGE 2900, Руководство владельца оборудования

Страница: 40 / 182

40
Using the System Setup Program
Integrated Devices Screen
Table 2-4 lists the options and descriptions for the information fields that appear on the Integrated
Devices screen.
Table 2-4. Integrated Devices Screen Options
Option Description
Integrated SAS Controller
(
Enabled default)
Enables or disables the integrated SAS controller. This option appears only if a SAS
controller is installed.
Integrated RAID
Controller
(
Enabled default)
Enables or disables the integrated RAID controller. This option appears only if a
SAS RAID controller is installed.
Embedded SATA
(
Off default)
Allows the integrated SATA controller to be set to Off or ATA Mode .
IDE CD-ROM Controller
(
Auto default)
Enables the integrated IDE controller. When set to Auto , each channel of the
integrated IDE controller is enabled if IDE devices are attached to the channel.
Diskette Controller
(
Auto default)
Enables or disables the system's diskette drive controller. When Auto is selected,
the system turns off the controller when necessary to accommodate a controller
card installed in an expansion slot. You can also configure the drive as
Read-Only ,
or Off . When using the Read-Only setting, the drive cannot be used to write to a
disk.
User Accessible USB Ports
(
All Ports On default)
Enables or disables the system’s user accessible USB ports. Options are All Ports
On , Only Back Ports On , and All Ports Off .
Embedded Gb NIC1
(
Enabled with PXE
default)
Enables or disables the system's integrated NIC1. Options are Enabled without
PXE , Enabled with PXE , and Disabled . PXE support allows the system to boot
from the network. Changes take effect after the system reboots.
MAC Address Displays the MAC address for the integrated 10/100/1000 NIC. This field does not
have user-selectable settings.
TOE Capability Displays the TCP/IP Offload Engine (TOE) feature status of NIC1.
Embedded Gb NIC2
(
Enabled without PXE
default)
Enables or disables the system's integrated NIC2. Options are Enabled without
PXE , Enabled with PXE , and Disabled . PXE support allows the system to boot
from the network. Changes take effect after the system reboots.
MAC Address Displays the MAC address for the integrated 10/100/1000 NIC. This field does not
have user-selectable settings.
TOE Capability Displays the TOE feature status of NIC2.