Dell POWER EDGE 2900, Руководство владельца оборудования

Страница: 24 / 182

24
About Your System
E2017 Timer Fail
Timer refresh failure. See "Getting Help" on page 147.
E2018 Prog Timer
Programmable interval timer
error See "Getting Help" on page 147.
E2019 Parity Error
Parity error. See "Getting Help" on page 147.
E201A SIO Err
SIO failure. See "Getting Help" on page 147.
E201B Kybd Controller
Keyboard controller failure. See "Getting Help" on page 147.
E201C SMI Init
System management interrupt
(SMI) initialization failure. See "Getting Help" on page 147.
E201D Shutdown Test
BIOS shutdown test failure. See "Getting Help" on page 147.
E201E POST Mem Test
BIOS POST memory test failure. See "Troubleshooting System
Memory" on page 124. If problem
persists, see "Getting Help" on
page 147.
E201F DRAC Config
Dell remote access controller
(DRAC) configuration failure. Check screen for specific error
messages.
Ensure that DRAC cables and
connectors are properly seated. If
problem persists, see your DRAC
documentation.
E2020 CPU Config
CPU configuration failure. Check screen for specific error
messages.
E2021 Memory
Population
Incorrect memory configuration.
Memory population order
incorrect. Check screen for specific error
messages. See "Troubleshooting
System Memory" on page 124.
E2022 POST Fail
General failure after video. Check screen for specific error
messages.
E2110 MBE DIMM ## & ##
One of the DIMMs in the set
implicated by "## & ##" has
had a memory multi-bit error
(MBE). See "Troubleshooting System
Memory" on page 124.
E2111 SBE Log Disable
DIMM ##
The system BIOS has disabled
memory single-bit error (SBE)
logging, and will not resume
logging further SBEs until the
system is rebooted. "##"
represents the DIMM implicated
by the BIOS. See "Troubleshooting System
Memory" on page 124.
Table 1-6. LCD Status Messages (continued)
Code Text Causes Corrective Actions