Dell P91F Скачать руководство пользователя | Manualshive

Страница: 57 / 65

background image

POST Behavior

Default: ON

MAC Address Pass-Through

Replaces the external NIC MAC address (in a supported dock or dongle) with the
selected MAC address from the computer.

Default: System Unique MAC Address.

Table 15. System setup options—Virtualization menu

Virtualization

Intel Virtualization Technology

Enables the computer to run a virtual machine monitor (VMM).

Default: ON

VT for Direct I/O

Enables the computer to perform Virtualization Technology for Direct I/O (VT-d).
VT-d is an Intel method that provides virtualization for memory map I/O.

Default: ON

Table 16. System setup options—Maintenance menu

Maintenance

Asset Tag

Asset Tag

Creates a system Asset Tag that can be used by an IT administrator to uniquely
identify a particular system. Once set in BIOS, the Asset Tag cannot be changed.

Service Tag

Displays the Service Tag of the computer.

BIOS Recovery from Hard Drive

Enables the computer to recover from a bad BIOS image, as long as the Boot Block
portion is intact and functioning.

Default: ON

NOTE:

BIOS recovery is designed to fix the main BIOS block and cannot

work if the Boot Block is damaged. In addition, this feature cannot work
in the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.

BIOS Auto-Recovery

Enables the computer to automatically recover the BIOS without user actions. This
feature requires BIOS Recovery from Hard Drive to be set to Enabled.

Default: OFF

Start Data Wipe

CAUTION:

This Secure Wipe Operation deletes information in a way that

it cannot be reconstructed.

If enabled, the BIOS will queue up a data wipe cycle for storage devices that are
connected to the motherboard on the next reboot.

Default: OFF

Allow BIOS Downgrade

Controls flashing of the system firmware to previous revisions.

Default: ON

Table 17. System setup options—System Logs menu

System Logs

Power Event Log

Clear POWER Event Log

Select keep or clear Power events.

Default: Keep

BIOS Event Log

Clear Bios Event Log

Select keep or clear BIOS events.

System setup

57

«
...
55
56
57
58
59
...
»

Содержание P91F


































































Отзывы:

Нет отзывов

Похожие инструкции для P91F

Бренд: Gateway Страницы: 124

POWERMATE - VERSION 2008

Бренд: NEC Страницы: 32

Бренд: Digital Equipment Страницы: 321

Бренд: Matrox Страницы: 174

Бренд: IBM Страницы: 126

Бренд: Vivo Страницы: 8

Бренд: Dell Страницы: 51

INSPIRON Inspiron 1100

Бренд: Dell Страницы: 95

Inspiron 24-5400

Бренд: Dell Страницы: 26

Бренд: Dell Страницы: 20

Бренд: LG Страницы: 24

Бренд: LG Страницы: 41

Бренд: LG Страницы: 136

Бренд: Sinocan Страницы: 41

Бренд: Cray Страницы: 56

Бренд: Böning Страницы: 42

Бренд: Avalue Technology Страницы: 12

Бренд: Avalue Technology Страницы: 122

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды