Setting Up the Monitor
|
27
Removing the Cable Cover
1
Press the tab on the cable cover.
2
Remove the two tabs on the bottom part of the cable cover from the slots on the
back of the monitor.
Wall Mounting (Optional)
NOTE:
Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit.
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1
Place the monitor on a soft cloth or cushion on a stable, flat table.
2
Remove the stand.
3
Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4
Attach the mounting bracket from the wall mounting kit to the monitor.
5
Mount the monitor on the wall by following the instructions that comes with the
wall mounting kit.
NOTE:
For use only with UL-listed wall mount bracket with minimum weight/load
bearing capacity of 10.66 kg (
P2715Q
)/8.68 Kg (
P2415Q
).
