Dell OptiPlex 9010 Mini-Tower Скачать руководство пользователя страница 42

Страница: 42 / 65

Table 5. Secure Boot

Secure Boot Enable

Allows you to enable or disable Secure Boot feature

•

Disable

•

Enable

Expert key Management

Allows you to manipulate the security key databases only if the system is in Custom

Mode. The Enable Custom Mode option is disabled by default. The options are:

•

KEK

•

dbx

If you enable the Custom Mode, the relevant options for PK, KEK, db, and dbx appear.

The options are:

•

Save to File- Saves the key to a user-selected file

•

Replace from File- Replaces the current key with a key from a user-selected

file

•

Append from File- Adds a key to the current database from a user-selected

file

•

Delete- Deletes the selected key

•

Reset All Keys- Resets to default setting

•

Delete All Keys- Deletes all the keys

NOTE: If you disable the Custom Mode, all the changes made will be erased and

the keys will restore to default settings.

Table 6. Performance

Option

Description

Multi Core Support

Specifies whether the process will have one or all cores enabled. The performance of

some applications will improve with the additional cores.

•

All - Enabled by default

•

Intel

SpeedStep

™

Allows you to enable or disable the Intel SpeedStep mode of the processor. This

option is enabled by default.

C States Control

Allows you to enable or disable the additional processor sleep states. This option is

enabled by default.

Intel

TurboBoost

™

Allows you to enable or disable Intel TurboBoost mode of the processor.

•

Disabled - Does not allow the TurboBoost driver to increase the performance

state of the processor above the standard performance.

•

Enabled - Allows the Intel TurboBoost driver to increase the performance of

the CPU or graphics processor.

Hyper-Thread Control

Allows you to enable or disable the Hyper-Threading technology. This option is

disabled by default.

Содержание OptiPlex 9010 Mini-Tower


































































Результаты поиска

Содержание OptiPlex 9010 Mini-Tower

Отзывы:

Похожие инструкции для OptiPlex 9010 Mini-Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 9010 Mini-Tower, Руководство пользователя

Результаты поиска

Содержание OptiPlex 9010 Mini-Tower

Отзывы:

Похожие инструкции для OptiPlex 9010 Mini-Tower

Бренды по названию

Популярные бренды