
Installing the Front Bezel
1.
Insert the hooks along the bottom edge of the front bezel into the slots on the chassis front.
2.
Rotate the bezel toward the computer to engage the front-bezel retention clips until they click into place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Expansion Cards
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Press the card-retention latch on the inside and pull the latch outwards on the other side.
12
Содержание OptiPlex 9010 Mini-Tower
