Dell OptiPlex 9010 AIO Скачать руководство пользователя страница 42

Страница: 42 / 59

Option

Description

•

Enable (selected by default) — User may enter OROM configuration screens

via the hotkey.

•

One-Time Enable — User can enter the OROM configuration screens via the

hotkeys during the next boot. After the boot, the setting will revert to disabled.

•

Disable — User can not enter the OROM configuration screens via the

hotkey.

Admin Setup Lockout

Allows you to enable or disable the option to enter setup when an admin password is
set.

•

Enable Admin Setup Lockout (selected by default)

Table 5. Performance

Option

Description

Multi Core Support

Specifies whether the process will have one or all cores enabled. The performance of
some applications will improve with the additional cores.

•

All (selected by default)

•

Intel

SpeedStep

™

Allows you to enable or disable the Intel SpeedStep mode of the processor.

•

Enable Intel(R) SpeedStep (selected by default)

C States Control

Allows you to enable or disable the additional processor sleep states.

•

C states (selected by default)

Intel

TurboBoost

™

Allows you to enable or disable Intel TurboBoost mode of the processor.

•

Enable Intel TurboBoost (selected by default) — Allows the Intel TurboBoost

driver to increase the performance of the CPU or graphics processor.

HDD Protection Support

This options allows users to enable and disable the HDD Protection feature.

•

HDD Protection Support

Содержание OptiPlex 9010 AIO




























































Результаты поиска

Содержание OptiPlex 9010 AIO

Отзывы:

Похожие инструкции для OptiPlex 9010 AIO

Бренды по названию

Популярные бренды

Dell OptiPlex 9010 AIO, Руководство пользователя

Результаты поиска

Содержание OptiPlex 9010 AIO

Отзывы:

Похожие инструкции для OptiPlex 9010 AIO

Бренды по названию

Популярные бренды