Dell OptiPlex 9010 AIO Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 59

background image

Option

Description

Password Configuration

This field controls the minimum and maximum number of characters allowed for the
admin and system passwords.

•

Admin Password Min

•

Admin Password Max

•

System Password Min

•

System Password Max

Password Bypass

Allows you to bypass the

System Password

and the internal HDD password prompts

during a system restart.

•

Disabled (selected by default) — Always prompt for the system and internal

HDD password when they are set.

•

Reboot Bypass — Bypass the password prompts on restarts (warm boots).

NOTE: The system will always prompt for the system and internal HDD passwords
when powered on from the off state (a cold boot). Also, the system will always
prompt for passwords on any module bay HDDs that may be present.

Password Change

Allows you to determine whether changes to the system and hard disk passwords are
permitted when an administrator password is set.

•

Allow Non-Admin Password Changes (selected by default)

TPM Security

This option lets you control whether the Trusted Platform Module (TPM) in the system
is enabled and visible to the operating system.
TPM Security (selected by default)

NOTE: Activation, deactivation, and clear options are not affected if you load the
setup program's default values. Changes to this option take effect immediately.

Computrace (R)

This field lets you activate or disable the BIOS module interface of the optional

Computrace Service

from

Absolute Software

.

•

Deactivate (selected by default)

•

Disable

•

Activate

Chassis Intrusion

This field controls the chassis intrusion feature.

•

Disable

•

Enable (selected by default)

•

On-Silent

CPU XD Support

Allows you to enable or disable the execute disable mode of the processor.

•

Enable CPU XD Support (selected by default)

OROM Keyboard Access

Allows you to determine if you access the Option Read Only Memory (OROM)
configuration screens via hotkeys during boot. These settings prevent access to the
Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension (CTRL+P/F12).

41

«
...
39
40
41
42
43
...
»

Содержание OptiPlex 9010 AIO




























































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 9010 AIO

Бренд: Acer Страницы: 106

Бренд: Acer Страницы: 83

Бренд: Acer Страницы: 81

Бренд: Acer Страницы: 89

T230H - Bmidh Wide Touch Screen Display

Бренд: Acer Страницы: 12

Бренд: Acer Страницы: 100

Бренд: Knoll Страницы: 2

Бренд: 7starlake Страницы: 32

IntelliStation 6866

Бренд: IBM Страницы: 148

Бренд: Acnodes Страницы: 10

6005 - Pro Microtower PC

Бренд: Compaq Страницы: 4

Бренд: Intel Страницы: 10

InBox300 Series

Бренд: InHand Страницы: 28

Бренд: Acer Страницы: 120

Бренд: Fujitsu Страницы: 38

Бренд: Fujitsu Страницы: 9

Бренд: Fujitsu Страницы: 10

Esprimo E5 Series

Бренд: Fujitsu Страницы: 73

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды