4. Install the following components:
a)
b)
c)
5. Follow the procedure in
After working inside your computer
.
Solid State Drive -SSD
Removing the SSD card
1. Follow the procedure in
Before working inside your computer
.
2. Remove the following components:
a)
b)
c)
3. Remove the screw (M2x2.5) that secures the SSD card to the system board [1].
4. Slide and remove the SSD card from the card slot on the system board [2].
5. Remove the thermal pad [3].
NOTE:
M.2 PCIe SSD with capacity over 512G (512G/1TB/2TB) must be installed with a thermal pad. M.2 SATA SSD
and M.2 PCIe SSD with 128G and 256G do not require a thermal pad.
Removing and Installing components
31
Содержание OptiPlex 5270 All-in-One
Страница 1: ...Dell OptiPlex 5270 All in One Service Manual Regulatory Model W20B Regulatory Type W20B001 ...
Страница 42: ...4 Lift the heat sink off the system board and display assembly base 42 Removing and Installing components ...
Страница 54: ...4 Pry and lift the base cover off the middle frame 54 Removing and Installing components ...
Страница 58: ...b Slide the PSU and lift it away from the chassis 58 Removing and Installing components ...
