Dell OptiPlex 5270 All-in-One Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 107

background image

HDMI

This topic explains the HDMI 2.0 and its features along with the advantages.

HDMI (High-Definition Multimedia Interface) is an industry-supported, uncompressed, all-digital audio/video interface. HDMI provides an
interface between any compatible digital audio/video source, such as a DVD player, or A/V receiver and a compatible digital audio and/or
video monitor, such as a digital TV (DTV). The intended applications for HDMI TVs, and DVD players. The primary advantage is cable
reduction and content protection provisions. HDMI supports standard, enhanced, or high-definition video, plus multichannel digital audio
on a single cable.

NOTE:

The HDMI 1.4 will provide 5.1 channel audio support.

HDMI 2.0 Features

•

HDMI Ethernet Channel

- Adds high-speed networking to an HDMI link, allowing users to take full advantage of their IP-enabled

devices without a separate Ethernet cable

•

Audio Return Channel

- Allows an HDMI-connected TV with a built-in tuner to send audio data "upstream" to a surround audio

system, eliminating the need for a separate audio cable

•

3D

- Defines input/output protocols for major 3D video formats, paving the way for true 3D gaming and 3D home theater applications

•

Content Type

- Real-time signaling of content types between display and source devices, enabling a TV to optimize picture settings

based on content type

•

Additional Color Spaces

- Adds support for additional color models used in digital photography and computer graphics

•

4K Support

- Enables video resolutions far beyond 1080p, supporting next-generation displays that will rival the Digital Cinema

systems used in many commercial movie theaters

•

HDMI Micro Connector

- A new, smaller connector for phones and other portable devices, supporting video resolutions up to 1080p

•

Automotive Connection System

- New cables and connectors for automotive video systems, designed to meet the unique

demands of the motoring environment while delivering true HD quality

Advantages of HDMI

•

Quality HDMI transfers uncompressed digital audio and video for the highest, crispest image quality.

•

Low -cost HDMI provides the quality and functionality of a digital interface while also supporting uncompressed video formats in a
simple, cost-effective manner

•

Audio HDMI supports multiple audio formats from standard stereo to multichannel surround sound

•

HDMI combines video and multichannel audio into a single cable, eliminating the cost, complexity, and confusion of multiple cables
currently used in A/V systems

•

HDMI supports communication between the video source (such as a DVD player) and the DTV, enabling new functionality

12

Technology and components

«
...
10
11
12
13
14
...
»

Содержание OptiPlex 5270 All-in-One












































































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 5270 All-in-One

Бренд: Daikin Страницы: 20

Бренд: Gigabyte Страницы: 2

IntelliStation M Pro 6220

Бренд: IBM Страницы: 166

ZBOX PRO ZP-QK7P3000

Бренд: Zotac Страницы: 25

Бренд: Dell Страницы: 13

Бренд: Monit Rally Страницы: 2

Бренд: Optoma Страницы: 2

Бренд: Speaka Professional Страницы: 4

SelectControl 1885

Бренд: Gardena Страницы: 164

Бренд: RAB Страницы: 2

Бренд: Partner Страницы: 52

Бренд: IEI Technology Страницы: 198

Бренд: Shuttle Страницы: 1

Kontron SBOX-7210

Бренд: S&T Страницы: 99

WorkFit-A, Single LCD Mount, LD

Бренд: Ergotron Страницы: 13

Бренд: Janz Tec Страницы: 44

Бренд: Portus Страницы: 4

Бренд: Acer Страницы: 49

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды