Dell OptiPlex 3040 Скачать руководство пользователя страница 49

Страница: 49 / 51

Feature

Specification

Front panel control

5-pin connector

Processor

1151-pin connector

Processor fan

4-pin connector

Service mode/Password clear/RTC reset
jumper

6-pin connector

Internal speaker

4-pin connector

Intruder connector

3-pin connector

Power connector

One 8-pin for PSU, one 4-pin for CPU, one 8-pin for

SATA power

Table 30. Controls and lights

Feature

Specification

Front of the computer

Power button light

White light — Solid white light indicates power-on state;
slow blinking white light indicates sleep state of the
computer.

Drive activity light

White light — Slow blinking white light indicates that the
computer is reading data from or writing data to the
hard drive.

Back of the computer

Link integrity light on integrated network
adapter

• Green — a 10 Mbps connection exists between the

network and the computer.

• Green — a 100 Mbps connection exists between the

network and the computer.

• Orange — a 1000 Mbps connection exists between

the network and the computer.

• Off (no light) — the computer is not detecting a

physical connection to the network.

Network activity light on integrated
network adapter

Yellow light — A blinking yellow light indicates that
network activity is present.

Power supply diagnostic light

Green light — The power supply is turned on and is
functional. The power cable must be connected to the
power connector (at the back of the computer) and the
electrical outlet.

Содержание OptiPlex 3040




















































Результаты поиска

Содержание OptiPlex 3040

Отзывы:

Похожие инструкции для OptiPlex 3040

Бренды по названию

Популярные бренды

Dell OptiPlex 3040, Руководство пользователя

Результаты поиска

Содержание OptiPlex 3040

Отзывы:

Похожие инструкции для OptiPlex 3040

Бренды по названию

Популярные бренды