Dell OptiPlex 3040 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 51

background image

Option

Description

• Intel HD Graphics

NOTE: If you do not select Auto, the on-board graphics device will be
present and enabled.

Table 8. Security

Option

Description

Admin Password

Allows you to set, change, and delete the admin password.

System Password

Allows you to set, change, and delete the system password.

Internal HDD-0 Password Allows you to set, change, and delete the computer’s internal HDD.

Internal HDD-0 Password Allows you to set, change, and delete the computer’s internal HDD.

Strong Password

This option lets you enable or disable strong passwords for the system.

Password Configuration

Allows you to control the minimum and maximum number of characters
allowed for a administrative password and the system password.

Password Bypass

This option lets you bypass the System (Boot) Password and the internal
HDD password prompts during a system restart.
• Disabled — Always prompt for the system and internal HDD password

when they are set. This option is disabled by default.

• Reboot Bypass — Bypass the password prompts on Restarts (warm

boots).

NOTE: The system will always prompt for the system and internal HDD

passwords when powered on from the off state (a cold boot). Also, the
system will always prompt for passwords on any module bay HDDs that
may be present.

Password Change

This option lets you determine whether changes to the System and Hard

Disk passwords are permitted when an administrator password is set.

Allow Non-Admin Password Changes

- This option is enabled by default.

TPM 1.2 Security

Allows you to control whether the Trusted Platform Module (TPM) is visible

to the operating system.
• TPM On (default)
• Clear
• PPI Bypass for Enable Commands
• PPI Bypass for Disable Commands
• Disabled
• Enabled (default)

Computrace

This field lets you Activate or Disable the BIOS module interface of the

optional Computrace Service from Absolute Software. Enables or disables
the optional Computrace service designed for asset management.
•

Deactivate

- This option is disabled by default.

• Disable
• Activate

38

«
...
36
37
38
39
40
...
»

Содержание OptiPlex 3040




















































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 3040

Бренд: IBM Страницы: 48

Бренд: Panasonic Страницы: 15

Бренд: NEC Страницы: 146

Бренд: Kontron Страницы: 68

FlowControl FC-S01

Бренд: Go!Paint Страницы: 20

Бренд: Vivo Страницы: 5

Бренд: Black & Decker Страницы: 20

OptiPlex 5070 Micro

Бренд: Dell Страницы: 34

Бренд: Lakeside Industries Страницы: 26

WCO-3400 Series

Бренд: Premio Страницы: 60

Бренд: Premio Computer Страницы: 142

Бренд: ClearCube Страницы: 3

Бренд: Gigabyte Страницы: 67

tBOX324-894-FL-GND Series

Бренд: AXIOMTEK Страницы: 52

Бренд: Shuttle Страницы: 27

Бренд: Winmate Страницы: 92

Бренд: Square One Industries Страницы: 113

Бренд: FabiaTech Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды