Dell Networking S4810, Руководство по установке

Страница: 29 / 42

To install a fan module, follow these steps.
1. Twist the latching screws so that the fan screen detaches from the system, as shown in the following
illustration.
2. Remove the screen and set it aside.
3. Take the fan module out of the shipping box.
4. Use the grab handle to slide the module into the bay.
5. Tighten the securing screw on the side of the module.
6. Replace the fan screen.
7. Twist the latching screws to the fan screen until it is securely attached to the system.
Replacing a Fan Module
To replace a fan module, follow these steps.
1. Loosen the securing screws on the sides of the fan module.
CAUTION: You must complete steps 2 and 3 within one minute or the system powers down.
2. Use the grab handle to slide the fan module out of the bay.
3. Use the grab handle on the replacement module to slide it into the bay.
4. Tighten the captive screws on the replacement module with a screwdriver. Ensure that the module is
secure.
Fans
29