Dell Networking S4810, Руководство по установке

Страница: 23 / 42

• all protective covers are in place.
• blank panels are installed if you do not install optional modules.
NOTE: A US AC power cable is included for powering up an AC power supply. You must order all
other power cables separately.
NOTE: ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist
or heel ground strap when handling the S4810–ON system and its components.
Power Up Sequence
When the system powers up, the fans immediately come on at high speed. The fan speed slows as the
system boots up.
AC Power
To add AC power, connect the power cord plug to each AC power connector. Make sure that the power
cord is secure (as shown in the following illustration).
CAUTION: Ensure that you correctly install the PSU. When correctly installed, the AC power
connector is on the left side of the PSU and the status LED is at the top of the PSU (as shown in
the following illustration).
As soon as the cable is connected between the S4810–ON and the power source, the system is
powered-up; there is no on/off switch.
Figure 9. AC Power Connection
1. Power Connection
2. LED
Install the S4810–ON
23