Dell Networking 8100 Series Скачать руководство пользователя страница 86

Страница: 86 / 129

Removing and Replacing Parts : Dell Inspiron 8100

3. Pivot the memory module down until it clicks into place. If you do not hear a

click, remove the module and reinstall it.

4. Insert the metal tabs on the memory module cover into the bottom case

assembly. Rotate the cover down and replace the screw.

Mini PCI Card Assembly

NOTICE:

Disconnect the computer and attached devices from electrical outlets

and remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by

periodically touching an unpainted metal surface on the computer.

You must remove the optional Mini PCI card assembly before the system board

assembly can be removed. A Mini PCI card assembly may consist of a modem, a

network adapter, a modem and network adapter combination, or a wireless network

adapter. A modem, network adapter, or modem and network adapter combination

must be connected to the wiring harness as appropriate; a wireless network adapter

must be connected to the system's internal antenna.

Removing the Mini PCI Card Assembly

1. Follow the instructions in "

Preparing to Work Inside the Computer

2. Remove the M2.5 x 20-mm screw and lift out the Mini PCI card cover.

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (13 of 56) [2/28/2004 7:37:23 AM]

Содержание Networking 8100 Series


































































































































Результаты поиска

Содержание Networking 8100 Series

Отзывы:

Dell Networking 8100 Series, Руководство по обслуживанию, Страница: 86 / 129

Результаты поиска

Содержание Networking 8100 Series

Отзывы: