Dell Networking 8100 Series Скачать руководство пользователя страница 35

Страница: 35 / 129

Solving Problems : Dell Inspiron 8100

Unexpected Characters

Disable the numeric keypad—

Press the <Num Lk> key to

disable the numeric keypad. Verify that the numbers lock light is

not lit.

Drive Problems

HINT:

For information on saving files to a floppy disk, see the

Tell Me How

help

file.

If you cannot save a file to a floppy disk

Ensure that Windows recognizes the drive—

Double-click the

My Computer

icon. If the floppy drive is not listed, perform a full

scan with your antivirus software to check for and remove viruses.

Viruses can sometimes prevent Windows from recognizing the

drive.

Cannot save files to a floppy disk—

Ensure that the floppy disk

is not full or write-protected (locked). See the following figure.

Test the drive with another floppy disk—

Insert another floppy

disk to eliminate the possibility that the original floppy disk is

defective.

file:///F|/Service%20Manuals/Dell/Inspiron/8100/solving.htm (10 of 18) [2/28/2004 7:37:13 AM]

Содержание Networking 8100 Series


































































































































Результаты поиска

Содержание Networking 8100 Series

Отзывы:

Dell Networking 8100 Series, Руководство по обслуживанию, Страница: 35 / 129

Результаты поиска

Содержание Networking 8100 Series

Отзывы: