Dell Networking 8100 Series Скачать руководство пользователя страница 5

Страница: 5 / 129

A Tour of Your Computer : Dell Inspiron 8100

The lights below the display indicate the following:

●

The light labeled

turns on when the computer is turned on and blinks when

the computer is in standby mode.

●

The light labeled

turns on when the computer reads data from or writes

data to the hard drive.

●

The light labeled

turns on steadily or blinks to indicate the battery charge

status. Indicator states include:

❍

Off, which indicates that the computer is operating on an adequately

charged battery or that the computer is turned off

❍

Flashing green, which indicates that the battery is fully charged

❍

Solid green, which indicates that the battery is charging

❍

Flashing orange, which indicates that the battery charge is low

file:///F|/Service%20Manuals/Dell/Inspiron/8100/tour.htm (3 of 18) [2/28/2004 7:37:11 AM]

Содержание Networking 8100 Series


































































































































Результаты поиска

Содержание Networking 8100 Series

Отзывы:

Dell Networking 8100 Series, Руководство по обслуживанию, Страница: 5 / 129

Результаты поиска

Содержание Networking 8100 Series

Отзывы: