Dell Latitude E7450 Скачать руководство пользователя страница 43

Страница: 43 / 57

Option

Description

• Primary AC Use
• Custom Charge — you can set the percentage to which the battery

must charge.

Intel Smart Connect
Technology

The option is disabled by default. If option enables will periodically sense
nearby wireless connection while the system is asleep. It will synchronize
emails or social media application that were open when system entered
the sleep state.
•

Smart Connection

(Disabled)

Table 9. POST Behavior

Option

Description

Adapter Warnings

Allows you to activate the adapter warning messages when certain
power adapters are used. The option is enabled by default.
• Enable Adapter Warnings

Keypad (Embedded)

Allows you to choose one of two mode it enable the keypad that us
embedded in the internal keyboard.
• Fn Key Only
• By Numlock

NOTE: When setup is running, this option has no effect, Setup

works in the “Fn Key Only” mode.

Mouse/Touchpad

Allows you to define how the computer handles the mouse and

touchpad input. The options are:
• Serial Mouse
• PS2 Mouse
•

Touchpad/PS-2 Mouse

(Default Setting)

Numlock Enable

Specifies if the NumLock function can be enabled when the computer

boots. This option is enabled by default.
• Enable Numlock

Fn Key Emulation

Allows you to match the <Scroll Lock> key feature of PS-2 keyboard with

the <Fn> key feature in an internal keyboard. The option is enabled by
default.
• Enable Fn Key Emulation

Fn Lock Option

Allows you to hot keys combination toggle the primary behavior. The

option are:
• Fn Lock
• Lock Mode Disable/Standard
• Lock Mode Enable/Secondary

MEBx Hotkey

Allows you to specifies whether the MEBx Hotkey function should be

enable when the system boots. The option is enabled by default.

Fastboot

Allows you to speed up the boot process by bypassing some

compatibility steps.

Содержание Latitude E7450


























































Результаты поиска

Содержание Latitude E7450

Отзывы:

Похожие инструкции для Latitude E7450

Бренды по названию

Популярные бренды

Dell Latitude E7450, Руководство пользователя

Результаты поиска

Содержание Latitude E7450

Отзывы:

Похожие инструкции для Latitude E7450

Бренды по названию

Популярные бренды