Dell Latitude E7450 Скачать руководство пользователя страница 40

Страница: 40 / 57

Option

Description

Password Change

Allows you to enable the disable permission to the System and Hard
Drive passwords when the admin password is set.
Default Setting:

Allow Non-Admin Password Changes

is not selected

Non-Admin Setup Changes

Allows you to determine whether changes to setup option are
permitted when an administrator password is set. The option is
disabled.
• Allows Wireless Switch Changes

TPM Security

Allows you to enable the Trusted Platform Module (TPM) during POST.
Default Setting: The option is disabled.

Computrace

Allows you to activate or disable the optional Computrace software The
options are:
•

Deactivate

(Default Setting)

• Disable
• Activate

NOTE: The Activate and Disable options will permanently activate
or disable the feature and no further changes will be allowed

CPU XD Support

Allows you to enable the Execute Disable mode of the processor.
Default Setting:

Enable CPU XD Support

OROM Keyboard Access

Allows you to set access to enter the Option ROM Configuration

screens using hotkeys during boot process. The options are:
•

Enable

(Default Setting)

• One Time Enable
• Disable

Admin Setup Lockout

Allows you to prevent users from entering Setup when an Administrator

password is set.
Default Setting:

Disabled

Table 6. Secure Boot

Secure Boot Enable

Allows you to enable or disable Secure Boot feature
• Disabled
•

Enabled

(Default Setting)

NOTE: For enable system needs to be UEFI boot mode and enable
legacy option ROMs to be turned off.

Expert key Management

Allows you to manipulate the security key databases only if the system

is in Custom Mode. The Enable Custom Mode option is disabled by
default. The options are:
• PK
• KEK
• db
• dbx

Содержание Latitude E7450


























































Результаты поиска

Содержание Latitude E7450

Отзывы:

Похожие инструкции для Latitude E7450

Бренды по названию

Популярные бренды

Dell Latitude E7450, Руководство пользователя

Результаты поиска

Содержание Latitude E7450

Отзывы:

Похожие инструкции для Latitude E7450

Бренды по названию

Популярные бренды