Back to Contents Page
1394 Card
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
Removing the 1394 Card
Replacing the 1394 Card
Removing the 1394 Card
1.
Follow the instructions in
Before Working on Your Computer
.
2.
Remove the bottom of the base assembly (see
Removing the Bottom of the Base Assembly
).
3.
Remove the modular drive (see
Removing the Modular Drive
).
4.
Remove the hinge covers (see
Removing the Hinge Covers
).
5.
Remove the heatsink assembly (see
Removing the Processor Heatsink Assembly
).
6.
Remove the display assembly (see
Removing the Display Assembly (E6400 and M2400)
or
Removing the Display Assembly (E6400 ATG)
).
7.
Remove the LED cover (see
Removing the LED Cover
).
8.
Remove the keyboard (see
Removing the Keyboard
).
9.
Remove the right speaker grill (see
Removing the Right Speaker Grill/Fingerprint Reader Assembly
).
10.
Remove the palm rest assembly (
Removing the Palm Rest Assembly
).
11.
Remove the card cage (see
Removing the Card Cage
).
12.
Disconnect the 1394 cable from the system board, and unroute the cable.
13.
Remove the two M2 x 3 screws.
14.
Lift the 1394 card up at an angle and remove it.
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1 1394 cable connector 2 system board
3 M2 x 3 screws (2)
4 1394 card
Содержание Latitude E6400 ATG
