background image

Back to Contents Page

  

Dell™ Latitude™ E4200 Service Manual

 

 

If you purchased a DELL™ n Series computer, any references in this document to Microsoft

®

 Windows

®

 operating systems are not applicable.

 

Information in this document is subject to change without notice. 

© 

2008-

2009 Dell Inc. All rights reserved.

 

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

,

 Latitude

Latitude ON

, and the 

DELL

 logo are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc., and is 

used by Dell under license; 

Intel

 is a registered trademark of Intel Corporation in the U.S. and other countries; 

Microsoft, Windows, Windows Vista, 

and the

 Windows Vista

 start 

button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

October 2009     Rev. A02

 

Back to Contents Page

 

 

 

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

CAUTION: 

A CAUTION indicates potential for property damage, personal injury, or death. 

Содержание Latitude E4200










































































Отзывы: