Dell Latitude E4200 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 73

background image

8.

Lift the display panel out of the display cover and carefully lay the display panel flat on your workspace on a clean and soft type of material. Be careful to
avoid damaging the display panel with the hinges and cables on the display cover.

9.

Disconnect the display cable.

Peel back the adhesive tape, then pull the cable out of the connector.

Replacing the Display Panel

1.

Place the display panel upside down on your workspace in front of the display cover.

1 screws (4)

2 display panel

3 display cover

NOTICE:

Failure to peel back the adhesive tape prior to disconnecting the display cable can cause permanent damage to the cable.

NOTICE:

To avoid permanent damage to the display cable and the display panel, pull evenly on the left and right sides of the cable connector

when removing the cable.

1 underside of display panel 2 display cable

3 adhesive tape

4 display cable connector

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

CAUTION:

The tabs on the outer edges of the display panel are made of very thin metal, and could cut the skin if not handled with care.

NOTICE:

To avoid permanent damage to the display panel, do not press or rub on the center of the panel.

NOTICE:

To avoid permanent damage to the display panel, lift the panel using both hands on the sides of the panel.

NOTICE:

To avoid permanent damage to the display panel when connecting the display cable, insert the cable into the display panel connector by

evenly pushing the left and right edges of the cable connector. Do not grip or hold the display panel by the circuit board on the bottom edge of the
panel.

«
...
18
19
20
21
22
...
»

Содержание Latitude E4200










































































Отзывы:

Нет отзывов

Похожие инструкции для Latitude E4200

Бренд: Teagle Страницы: 40

Бренд: IEI Technology Страницы: 3

SRCSASBB8I - RAID Controller

Бренд: Intel Страницы: 36

EK-FB GA AX370 Gaming RGB Monoblock

Бренд: ekwb Страницы: 2

Бренд: ROE Страницы: 41

Бренд: JETWAY Страницы: 55

Extreme Gaming VGA Cooler GV1000

Бренд: ZALMAN Страницы: 7

EK-Loop Modulus Series

Бренд: ekwb Страницы: 7

ELITENAS EN104L+(B)

Бренд: Sans Digital Страницы: 9

Бренд: WABCO Страницы: 29

CNPS11X Extreme

Бренд: ZALMAN Страницы: 12

Бренд: C-Smartlink Страницы: 7

Бренд: IBM Страницы: 130

Бренд: ADS Technologies Страницы: 21

Бренд: LaView Страницы: 2

Бренд: RAID Страницы: 80

Modular Fast Fiber Switch Converter MT-RJ

Бренд: Lindy Страницы: 3

Бренд: IBA Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды