Dell Latitude D410, Руководство по обслуживанию

Страница: 29 / 38

Back to Contents Page
System Board
Dell™ Latitude™ D410 Service Manual
Removing the System Board
Replacing the System Board
Removing the System Board
The system board's BIOS chip contains the Service Tag sequence, which is also visible on a barcode label on the bottom of the computer. The replacement kit
for the system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the center control cover .
3. Remove the keyboard .
4. Remove the internal card with Bluetooth ® wireless technology .
5. Remove the display assembly .
6. Remove the palm rest .
7. Remove the fan .
8. Remove the M2.5 x 5-mm screw that secures the plastic shield to the computer base.
9. Disconnect the smart card reader from the system board.
10. Disconnect the connector of the internal card with Bluetooth ® wireless technology from the system board.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide .
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
1 M2.5 x 5-mm screw (1)
2 plastic shield