Removing and Replacing Parts: Dell Latitude CPi A-Series System User's Guide
CAUTION: Hard-disk drives are extremely fragile and must be handled carefully.
Follow these guidelines:
●
The primary hard-disk drive is installed in a metal carrier to protect the
drive and make installation easier. When removing and installing hard-disk
drives, handle the drive carrier, not the drive itself.
●
Never press down on the top of the drive.
●
Do not drop the drive. Even a slight jar or bump can damage the drive
heads and spinning plates, thus rendering the drive inoperable.
●
The primary hard-disk drive may be hot to the touch under extreme
environmental conditions. If the drive is hot, allow it to cool before
replacing it.
Preparing a New Primary Drive
Every primary hard-disk drive must be physically formatted, partitioned, and logically formatted
before it can be used to store data. Every primary hard-disk drive from Dell is physically
formatted before it is sent to you. Use the program(s) provided by your operating system to
partition and logically format the hard-disk drive.
Installing Memory Modules
NOTES:
If necessary, print these instructions for reference before proceeding.
CAUTION: If you install a combination of extended-data out (EDO) and SDRAM
memory modules, your computer will not operate.
To prepare the computer to remove or install memory modules, perform the following steps:
1.
Turn off the computer and any attached peripherals.
Do not install memory modules while the computer is in suspend, standby, or
suspend-to-disk mode.
2.
If the computer is docked, undock it.
3.
Disconnect the computer and peripherals from AC power to reduce the potential for
personal injury or shock.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/...20SERIES/CPi%20A%20SERIES%20USRGUIDE/R_R.htm (3 of 6)6/21/2004 1:40:44 AM