NOTE:
You can use a plastic scribe to lift the speaker module from the computer.
Installing the speaker module
1
Place the speaker module into the slots on the computer.
2
Route the speaker cable through the routing channel and secure it with the tapes.
3
Connect the speaker cable to the connector on the system board.
4
Connect the smart card reader cable and then the LED board cable to the connector on the palm rest.
5
Install the:
a
b
c
d
e
NOTE:
To install both cards if equipped.
6
Follow the procedure in
After working inside your computer
.
Placa de LED
Removing the LED board
1
Follow the procedure in
Before working inside your computer
.
2
Remove:
a
b
20
Extracción e instalación de componentes
