Installing battery
1
Insert the battery into the slot on the computer.
2
Connect the battery cable to the connector on the system board.
3
Replace the M 2 x 4L screws to secure the battery to the computer.
4
Install the:
a
b
c
NOTE:
To install both cards if equipped .
5
Follow the procedure in
After working inside your computer
.
PCIe Solid State Drive (SSD)
Removing the NVMe SSD card
1
Follow the procedure in
Before working inside your computer
.
2
Remove:
a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler.
c
d
NOTE:
Disconnect the battery cable from the system board and remove the battery.
Extracción e instalación de componentes
13
