Disipador de calor
Removing heat sink assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
NOTE:
To remove both cards if equipped and no need to remove the blank filler.
c
d
3
To remove the heat sink assembly:
NOTE:
To remove the eDP cable, refer
.
a Disconnect the fan cable from the system board [1].
b Disconnect cables from the LCD assembly to gain access to screws[2].
c Remove the 1 M2.0 x 3.0 screws that secure the fan to the system board[3].
d Remove the 1 M2.0 x 2.0 screws that secure the heat sink to the system board [4].
NOTE:
Loosen the screws on the system board in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat
sink
e Lift the heat sink assembly from the system board.
Extracción e instalación de componentes
27
