Installing the battery
1
Insert the battery into the slot on the tablet.
2
Replace the M2.0 x 4.0 screws to secure the battery to the tablet.
3
Connect the battery connector to the system board and release the adhesive tape that secures the connector.
4
Install the:
a
b
NOTE:
uSIM card is installed only on tablets shipping with WWAN module.
5
Follow the procedure in
After working inside your tablet
.
System Fan
Removing the system fan
1
Follow the procedure in
Before working inside your tablet
2
Remove the:
a
NOTE:
Micro-SIM card slot is available only on tablets shipped with WWAN module.
b
3
To remove the system fan:
a Disconnect the system fan cable from the system board [1].
b Remove the M2.0 x 4.0 screws (2) that secure the system fan [2].
Removing and installing components
19
Содержание Latitude 5290 2-in-1
