Dell Latitude 3410, Руководство по обслуживанию

Страница: 42 / 104

Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the speakers and provides a visual representation of the installation procedure.
Steps
1. Place the speaker assembly onto the mounting points on the bottom base on the computer.
2. Route the cables from both the speaker modules through the middle section of the bottom base, above the touchpad, and
fold back the adhesive strips to secure the cables. Once secured, connect the speaker's cable connector to the connector
on the system board.
Next steps
1. Install the battery .
2. Install the base cover .
3. Install the SD card .
4. Follow the procedure in After working inside your computer .
42 Disassembly and reassembly