Installing M.2 Solid State Drive (SSD)
1
Align the notch on the SSD card with the tab on the SSD card connector and slide the card into the slot.
2
Align the screw hole on the SSD card with the screw hole on the system board.
3
Replace the screw that secures the SSD card to the system board.
4
Install the:
a
b
c
5
Follow the procedure in
After working inside your computer
.
Power switch board
Removing power switch board
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the power switch:
a Disconnect the power switch cable from the power switch board [1].
b Remove the M.2.0x3.0 screws that secure the power switch board on the computer [2].
c Lift the power switch board away from the computer [3].
18
Removing and installing components