Dell Latitude 12 7212 Скачать руководство пользователя

Страница: 64 / 79

Performance screen options

Option

Description

Multi Core Support

This field specifies whether the process has one or all cores enabled. The performance of some applications
improves with the additional cores. This option is enabled by default. Allows you to enable or disable multi-core
support for the processor.

•

Enable Multi Core Support

Default setting: The option is enabled.

Intel SpeedStep

Allows you to enable or disable the Intel SpeedStep mode of the processor.

•

Enable Intel SpeedStep

Default setting: The option is enabled.

C-States Control

Allows you to enable or disable the additional processor sleep states.

•

C states

Default setting: The option is enabled.

Intel TurboBoost

Allows you to enable or disable the Intel TurboBoost mode of the processor.

•

Enable Intel TurboBoost

Default setting: The option is enabled.

HyperThread
Control

Allows you to enable or disable the HyperThreading in the processor.

•

Disabled

•

Enabled

Default setting: Enabled.

Power Management

Option

Description

Lid Switch

You can enable or disable the lid switch so the screen does not shut off when the lid is closed. The option is:

•

Enable Lid Switch

This option is selected by default.

AC Behavior

You can enable or disable the computer from turning on automatically when an AC adapter is connected. The
option is:

•

Wake on AC

This option is disabled by default.

Auto On Time

You can set the time at which the computer must turn on automatically. The options are:

•

Disabled

. This option is selected by default.

•

Every Day

System setup

Содержание Latitude 12 7212
















































































Результаты поиска

Содержание Latitude 12 7212

Отзывы:

Похожие инструкции для Latitude 12 7212

Бренды по названию

Популярные бренды

Dell Latitude 12 7212, Руководство пользователя

Результаты поиска

Содержание Latitude 12 7212

Отзывы:

Похожие инструкции для Latitude 12 7212

Бренды по названию

Популярные бренды