Dell Latitude 12 7212 Скачать руководство пользователя | Manualshive

Страница: 59 / 79

background image

Option

Description

Advanced Boot
Options

Allows you the legacy option ROMs to load. By default, all the option are disabled.

•

Enable Legacy Option ROMs

•

Enable UEFI Network Stack

•

Enable Attempt Legacy Boot

UEFI Boot Path
SecurityOptions

Allows you to control whether or not the system will prompt to the user to enter the Admin password, when a user
selects a UEFI boot path from the F12 boot Menu.

•

Always, Except Internal HDD

. This option is enabled by default.

•

Always

•

Never

NOTE:

These options have no relevance if the Admin password is not set BIOS settings.

Date/Time

Allows you to change the date and time.

System Configuration screen options

Option

Description

SATA Operation

You can configure the internal SATA hard drive controller. The options are:

•

Disabled

•

AHCI

•

RAID On

. This option is enabled by default.

SMART Reporting

You can control whether hard drive errors for integrated drives are reported during system startup. This technology
is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification.

•

Enable SMART Reporting

USB Configuration

You can configure the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any type
of USB Mass Storage Devices (hard drive or memory key).
If the USB port is enabled, the device attached to this port is enabled and available for the OS.

If the USB port is disabled, the OS cannot see any device attached to this port.

The options are:

•

Enable USB Boot Support

This option is enabled by default.

•

Enable External USB Ports

This option is enabled by default.

NOTE:

The USB keyboard and mouse always work in the BIOS setup irrespective of these settings.

USB PowerShare

You can configure the USB PowerShare feature behavior. This option allows you to charge external devices using
the stored system battery power through the USB PowerShare port.

•

Enable USB PowerShare

This option is disabled by default.

Audio

You can enable or disable the integrated audio controller.
The

Enable Audio

option is selected by default.

System setup

59

«
...
57
58
59
60
61
...
»

Содержание Latitude 12 7212
















































































Отзывы:

Нет отзывов

Похожие инструкции для Latitude 12 7212

Бренд: Tobii Dynavox Страницы: 32

Бренд: Denon Страницы: 10

Бренд: Wetif Страницы: 73

Бренд: DGM Страницы: 26

Бренд: WeiHeng Digital Страницы: 43

IMPERIUS SEVEN 3G MT7009

Бренд: Mediadroid Страницы: 16

Бренд: auna multimedia Страницы: 30

Dereneville DAE-01 CL

Бренд: AVDesignHaus Страницы: 16

Бренд: Archos Страницы: 39

Бренд: Venturer Страницы: 24

Бренд: SHUOYING INDUSTRIAL Страницы: 14

Бренд: Zte Страницы: 170

Бренд: Zte Страницы: 162

Бренд: Abydos Innovations Страницы: 13

Бренд: A-Link Страницы: 8

Бренд: Wacom Страницы: 78

Бренд: Hisense Страницы: 40

Бренд: Yarvik Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды