manualshive.com logo in svg

Dell Inspiron One 2330, Руководство по обслуживанию, Страница: 70 / 170

Поделиться
Скачать
Dell Inspiron One 2330 Скачать руководство пользователя страница 70

Registration

The Registration menu settings adjust the black plane’s margins. To set print registration, select 

REGISTRATION

 from the Diagnostics menu. The following will display:

Note:  

Pressing 

 will display one margin setting per line below the 

REGISTRATION

 header. 

The 

REGISTRATION

 settings and values are: 

Margins

To change the value of any margin setting, press 

 or 

 to increase or decrease the margin setting value, and 

then press 

 to save. The panel displays 

Submitting changes...

 and returns to the initial 

REGISTRATION

 

menu screen. To exit the margin setting menu without changing the setting’s value, press 

.

Top Margin

This setting moves the black plane’s top margin up or down. Increasing the margin value moves text down the 
page and increases the amount of space between the page’s top edge and the top margin. Decreasing the 
margin value moves text up the page and narrows the amount of space between the page’s top edge and the 
top margin. The default margin is 1/6 inch.

Note:  

Modifying the top margin moves the entire image either up or down on the physical page. In order to 

preserve the bottom margin, changing the top margin does not compress or expand the image. 

Bottom Margin

This setting moves the black plane’s bottom margin up or down. Increasing the margin value moves text down 
the page and narrows the amount of space between the bottom edge of the page and the bottom margin. 
Decreasing the margin value moves text up the page and widens the amount of space between the bottom edge 
of the page and the bottom margin. The default margin is 1/6 inch.

Note:  

Modifying the bottom margin affects the rate of the stepper motor and may cause the page image to 

be compressed or expanded.

Left Margin and Right Margin

These settings move the position of the black plane’s margin right or left. Increasing the margin value moves the 
margin to the right. Decreasing the margin value moves the margin to the left. The default margin is 1/4 inch.

Note:  

Modifying the left and right margins moves the entire image left or right on the physical page. In 

order to preserve the right margin, changing the left margin does not compress or expand the image.

REGISTRATION

Top Margin

Setting

Value

Top Margin

-16...16 (0)*

Bottom Margin

-20...20 (0)*

Left Margin

-25...25 (0)*

Right Margin

-128...127 (0)*

Print Quick Test Page

None

3-6

Содержание Inspiron One 2330











































































































































































Отзывы:

Нет отзывов