l
One half Mini-Card slot - for Wireless Local Area Network (WLAN)
Removing the Mini-Card
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Loosen the captive screw on the mini door.
4.
Disconnect the antenna cables from the Mini-Card.
5.
Release the Mini-Card by removing the two screws that secure the
Mini-Card to the system board connector.
6.
Lift the Mini-Card out of its system board connector.
NOTE:
Depending on the configuration of the computer when it was sold, the Mini-Card slots may or may not have Mini-Cards installed in them.
1 Mini-Card
2 screws (2)
3 antenna cable connectors (2)
Содержание Inspiron Mini 10v
