Dell Inspiron Inspiron 14z, Руководство по обслуживанию

Страница: 48 / 53

Back to Contents Page
System Board
Dell™ Studio 14z Service Manual
Removing the System Board
Replacing the System Board
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
Removing the System Board
1. Follow the instructions in Before You Begin .
2. Remove any installed cards from the ExpressCard slot or the 8-in-1 Media Card Reader.
3. Remove the battery (see Removing the Battery ).
4. Remove installed memory modules (see Removing the Memory Module ).
5. Remove the keyboard (see Removing the Keyboard ).
6. Remove the hard drive (see Removing the Hard Drive ).
7. Remove the palm rest (see Removing the Palm Rest ).
8. Remove any installed Mini-Cards (see Communication Cards ).
9. Remove the display assembly (see Removing the Display Assembly ).
10. Remove the bluetooth card (see Removing the Bluetooth Card ).
11. Remove the speakers (see Removing the Speakers ).
12. Remove the tweeters (see Removing the Tweeters ).
13. Remove the coin-cell battery (see Removing the Coin-Cell Battery ).
14. Disconnect the AC adapter cable from the connector on the system board.
15. Disconnect the hall sensor cable from the connector on the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: Handle components and cards by their edges, and avoid touching pins and contacts.