Dell Inspiron 8200 Скачать руководство пользователя | Manualshive

Страница: 56 / 57

background image

Voltage Selection Switch

The voltage selection switch must be set to match the AC power available at your location. The switch should be set for 115 V in most of North and South
America and some Far Eastern countries such as Japan, South Korea, and Taiwan. For most of Europe, the Middle East, and the Far East, the switch should be
set for 230 V.

NOTE:

The voltage selection switch must be set to the 115-V position even though the AC power available in Japan is 100 V.

Parallel Connector

Connect a parallel device, such as a printer, to the parallel connector. If you have a USB printer, plug it into a USB connector.

Serial Connector

Connect a serial device, like a handheld device, to the serial connector.

Mouse Connector

Plug a standard mouse into the green mouse connector. If you have a USB mouse, plug it into a back-panel USB connector.

Keyboard Connector

If you have a standard keyboard, plug the keyboard into the purple keyboard connector. If you have a USB keyboard, plug it into a back-panel USB connector.

USB Connectors

For quick connections, Dell recommends using the front USB connectors for USB devices such as digital cameras, gaming controllers, and scanners. Use the
back-panel USB connectors for USB mouse and keyboard connections.

Line-Out Jack

Use the green line-out jack (available on computers with integrated sound) to attach headphones and most speakers with integrated amplifiers.

On computers with a sound card, the line-out jack is on the card.

Line-In Jack

Use the blue line-in jack (available on computers with integrated sound) to attach a record/playback device such as a cassette player, CD player, or VCR.

On computers with a sound card, the line-in jack is on the card.

Microphone Jack

Use the pink microphone jack (available on computers with integrated sound) to attach a personal computer microphone for voice or musical input into a sound
or telephony program.

On computers with a sound card, the microphone jack is on the card.

Video Connector

Plug the cable from your monitor into the blue video connector.

Back to Contents Page

NOTICE:

This computer supports the use of a USB hub. However, do not connect two or more USB hubs to a USB connector. Doing so may cause the

computer to unexpectedly reboot.

HINT:

If you attach a USB device that was not included in your original computer order, you may need to install a specific driver to make the device

work. Check the documentation that came with the device or contact the USB device manufacturer for more information.

«
...
54
55
56
57
»

Содержание Inspiron 8200


























































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 8200

Бренд: Canon Страницы: 160

Бренд: Baaske Medical Страницы: 40

Бренд: Worx Professional Страницы: 106

NUC 11 Performance

Бренд: Intel Страницы: 20

Бренд: Oceanic Страницы: 80

Evo Desktop Series

Бренд: Compaq Страницы: 30

Бренд: Casio Страницы: 143

Бренд: Vivo Страницы: 12

DESK-V000EB V000EB

Бренд: Vivo Страницы: 2

Бренд: Aplex Страницы: 77

200 G1 Microtower

Бренд: HP Страницы: 141

Бренд: Uplift Desk Страницы: 8

Бренд: IBM Страницы: 53

Бренд: Minix Страницы: 48

Бренд: MITS Страницы: 158

Бренд: Commodore Страницы: 148

Бренд: Bosanova Страницы: 2

Бренд: Fluke Страницы: 122

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды