Dell Inspiron 6000, Руководство по обслуживанию

Страница: 35 / 45

Back to Contents Page
System Board
Dell Inspiron™ 6000 Service Manual
Removing the System Board
Replacing the System Board
Removing the System Board
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the memory modules , the Mini PCI card (if applicable), and the optical drive .
3. Remove the hard drive .
4. Remove the hinge cover .
5. Remove the keyboard .
6. Remove the display assembly .
7. Remove the palm rest .
8. Remove the video card/thermal-cooling assembly (if applicable).
9. Remove the MCH heat sink .
10. Disconnect the speaker connector from the system board.
11. Remove the microprocessor thermal-cooling assembly .
12. Remove the microprocessor .
13. Remove the three M2.5 x 5-mm screws from the system board.
CAUTION: Before you perform the following procedures, see the safety instructions in the Product Information Guide .
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1 M2.5 x 5-mm screws (3)
2 system board bottom
assembly