Dell Inspiron 580 Скачать руководство пользователя страница 22

Страница: 22 / 39

Type 2

Loosen the four captive screws that secure the processor fan and heat sink assembly to the system board.

Lift the processor fan and heat sink assembly out of the computer.

Replacing the Processor Fan and Heat Sink Assembly

Follow the procedures in

Before You Begin

Clean the thermal grease from the bottom of the processor fan and heat sink assembly.

Apply the new thermal grease to the top of the processor.

Replace the processor fan and heat sink assembly:

Type 1

If required, rotate the fasteners on the processor fan and heat sink assembly clockwise to ensure that they are in the lock position.

Align and press the four fasteners on the processor fan and heat sink assembly into the screw holes on the system board.

Type 2

Align the four captive screws on the processor fan and heat sink assembly with the screw holes on the system board.

Tighten the four captive screws that secure the processor fan and heat sink assembly to the system board.

Connect the processor fan cable to the system board connector (see

System Board Components

Replace the computer cover (see

Replacing the Computer Cover

Connect your computer and devices to electrical outlets, and turn them on.

1 processor fan cable 2 fastener grooves (4)

3 fasteners (4)

4 processor fan and heat sink assembly

1 processor fan cable 2 captive screws (4)

3 processor fan and heat sink assembly

CAUTION:

When reinstalling the fan, ensure that you do not pinch the wires that run between the system board and the fan.

CAUTION:

Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a

requirement for optimal processor operation.

NOTE:

Ensure that the processor fan and heat sink assembly is correctly seated and secure.

Содержание Inspiron 580








































Результаты поиска

Содержание Inspiron 580

Отзывы:

Похожие инструкции для Inspiron 580

Бренды по названию

Популярные бренды

Dell Inspiron 580, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 580

Отзывы:

Похожие инструкции для Inspiron 580

Бренды по названию

Популярные бренды